VIPAC Logo

VIPAC – Endurance Test Results

Clause 9.3 of ATS 5200.103:2004 – Endurance Test

All components shall be subjected to cyclic testing of 100 000 pressure cycles (10 000 cycles for disposable units) at a minimum pressure cycle frequency of 30 ±2 cycles/min at a temperature of 23 ±2°C and a minimum and maximum pressure range of 0 to 1034 kPa, with the following ratios in accordance with AS 3707:
(a) The ratio of the pressure rise/pressure fall rates 2:1
(b) The ‘on time’ (i.e., rise + dwell times), ‘off time’ (i.e., fall + dwell times). 1:1

Product Code
Test Conducted
Results
Conformity to Clause 9.3 of ATS 5200.103

H2-300-AUS The sample was subjected to 100,000 cycles at a temperature of 23 ± 2°C with a minimum and maximum pressure range from 0 to 1034 kPa with the ratios as specified in AS 3707
No leakage or other failure observed at the end of the test

Conforms

H2minusO Space Saver Flow Management Device - FMD - Slick-W

H2minusO 4in FMD Install Zennergy Team Video

Video captures the installation of a 4 inch FMD that was managed and overseen by the Zennergy team. The 4 inch FMD is most common in the Commercial/ Med Industrial Industry- Hotels, Manufacturing Facilities, HOA/Condo's, Food Processing Facilities, Etc... The H2minusO Flow Management Device FMD is saving clients on their billable water/sewer bills around the world!!!
H2minusO Space Saver Flow Management Device - FMD - Slick-B

H2minusO 3in FMD Install Zennergy Team Video

Video captures the installation of a 3 inch FMD that was managed and overseen by the Zennergy team. The 3 inch FMD is most common in the Commercial/ Med Industrial Industry- Hotels, Airports, HOA/Condo's, Micro Breweries, Etc... The H2minusO Flow Management Device FMD is saving clients on their billable water/sewer bills around the world!!!
VIPAC Logo

VIPAC – Hydrostatic Pressure Test Results

Clause 9.2 of ATS 5200.103:2004 – Hydrostatic Pressure

When subjected to permanent hydrostatic pressure test of 2 +0.1, −0 MPa at the manufacturer’s stated maximum
operating temperature of ‘x’ +5, −0°C for 60 min +10, −0 s, and all components shall not leak.

Product Code
Test Conducted
Results
Conformity to Clause 9.2 of ATS 5200.103

H2-300-AUS The sample was subjected to a minimum hydrostatic pressure of 2.1 MPa (2100kPa) for a test period of 1 hour at a temperature of 23 ± 2°C
No leakage or other failure observed at the end of the test

Conforms

High Volume Users

International Beverage Manufacture Reduces Water Consumption

Headquartered strategically in Miami, Florida, American Beverage Depot operates four manufacturing lines at their state-of-the-art facility for the production and packaging of their beverages. Manufacture and marketer of four platforms of beverages: Premium Juices, Soft Drinks and Water. ABD also offers Co-Packing opportunities to customers, Providing from start to finish all the services needed to manufacture the product desired.

Beer Brewery

Predominant Brewing Company in the U.S.A. Committed to Advancing Water Efficiency

Tracking water usage and beer production separately at each of their breweries. Using those numbers to calculate a weighted average for the company’s overall water-to-beer ratio. Individual breweries that make relatively large volumes of beer each year have a greater influence on the company wide ratio.

Sustainability requires brewing great beer while using less water in our processes. Three of this clients eight major breweries and parts of our agricultural supply chain are located in or near water-stressed regions, so they emphasize advancing water efficiency initiatives at these locations.The #2 brewing company in the US enjoys almost 30% of the domestic beer market has scheduled the installation of the H2minusO FMD to reduce water expenses and increase profitability.